Product ID:M-BOND AE RESIN
MSDS Date:04/19/1994
FSC:8010
NIIN:00N062946
MSDS Number: BYWHM

MEASUREMENTS GROUP INC

RALEIGH, NC 27611
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 919-365-3800

Preparer: R.L. FRIDLEY

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

RESORCINOL; (M-DIHYDROXYBENZENE) (CERCLA)

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 3.0%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM; 20 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE, 1,2-EPOXY-3-PHENOXY-; (PHENYL GLYCIDYL ETHER)

CAS: 122-60-1

RTECS: TZ3675000

Fraction By Weight: 4.0%

OSHA PEL 10 PPM

ACGIH TLV: 1 PPM, S

(ORAL, RAT) >4000

RTECS: 9999999ZZ

Fraction By Weight: 93%

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE, 2,2-BIS(P-(2,3-EPOXYPROPOXY)PHENYL-; (BISPHENOL A

CAS: 1675-54-3

RTECS: TX3800000

OSHA PEL N/K

ACGIH TLV: N/K

EPOXY RESIN

CAS: 25085-99-8

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE, 1-CHLORO-2,3-EPOXY-; (EPICHLOROHYDRIN) (SARA

CAS: 106-89-8

RTECS: TX4900000

Fraction By Weight: <0.1%

OSHA PEL 5 PPM, S

ACGIH TLV: 2 PPM, S

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

0

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:SEE INGREDIENT 3
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE RESPIRATORY
CONGESTION. EYES: MAY CAUSE IRRITATION, BURNING SENSATION AND
REDDENING OF EYE. MAY CAUSE SEVERE IRRITATION WITH POSSIBILITY OF
PERMANENT DAMAGE IF LEFT UNTREATED. SK IN: PRIMARILY A SKIN
IRRITANT; IT CAN CAUSE HYPEREMIA, ITCHING AND DERMATITIS
PARTICULARLY TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:PHENYL GLYCIDYL ETHER: IARC MONOGRAPHS
ON THE EVALUATION OF CARCIN RISK OF CHEMS TO MAN, VOL 47, PG 237,
1989, GROUP 2B.
Effects of Overexposure:HLTH HAZ: SUSCEPTIBLE INDIVIDUALS. INGESTION:
MAY CAUSE BURNS OF MOUTH AND THROAT. NO HAZARD ANTICIPATED FROM
INGESTION INCIDENTAL TO INDUSTRIAL EXPOSURE. THIS PRODUCT CONTAINS
A TRACE OF EPICHLOROHYD RIN. FURTHER STUDIES MAY ESTABLISH A
CARCINOGENIC AFFECT OF THIS MATERIAL ON THE HUMAN (MFR).
Medical Cond Aggravated by Exposure:ALLERGIC SKIN REACTION AND
DERMATITIS IN SENSITIVE INDIVUDALS.

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE OXYGEN/ARTF
RESP) . EYES: IRRIGATE IMMED FOR AT LEAST 15 MIN. CONSULT MD OR
OPHTHALMOLOGIST. INGEST: GIVE LG AMTS OF WATER/MILK. DO NOT INDUCE
VOM IT. TRANSPORT TO MED FACILITY. SKIN: WASH AFFECTED AREA W/SOAP
& WATER & FLUSH W/CLEAN WATER. CONSULT MD. NOTE TO MD: CORR & MAY
CAUSE STRICTURE. IF LAVAGE IS PERFORMED, SUGGEST ENDOTRACHEAL
(SUPDAT)

Flash Point Method:PMCC
Flash Point:245F,118C
Lower Limits:1.4%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL. RESIDUAL
RESIN MAY BE REMOVED USING STEAM OR HOT SOAPY WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 80F (27C) IN A DRY PLACE.
AVOID PROLONGED BREATHING OF VAPORS AND SKIN AND EYE CONTACT.
Other Precautions:KEEP CONTAINERS TIGHTLY CAPPED.

Respiratory Protection:ADEQUATE VENTILATION TO KEEP BELOW TLV. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST & MECHANICAL TO KEEP BELOW TLV.
Protective Gloves:NEOPRENE/POLYETHYLENE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NEOPRENE/POLYETHYLENE APRON, EMERG EYE WASH
AND DELUGE SHOWER WHICH MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY WITH SOAP AND WATER AFTER
HANDLING.
Supplemental Safety and Health
FIRST AID PROC: &/OR ESOPHAGOSCOPIC CTL. IF BURN IS PRESENT, TREAT AS
ANY THERMAL BURN AFTER DECONTAM. NO SPECIFIC ANTIDOTE. SUPPORTIVE
CARE - TREATMENT BASED ON JUDGMENT OF MD IN RESPONSE TO RXNS OF
PATIENT.

Vapor Pres:1 @ 226F
Vapor Density:>3.8
Spec Gravity:1.15 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER TO CLEAR LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG ALKALINE, ACID, AMINE AND OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BY-PRODUCTS EXPECTED W/INCOMPLETE
COMBUSTION OF EPOXY RESINS, PHENOLS, OXIDES OF SILICON AND CARBON.
Conditions to Avoid Polymerization:LARGE MASS REACTIONS IN EXCESS OF
ONE POUND (0.45 KG) WITH ALIPHATIC AMINE SYSTEMS.

Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.